- High dehumidification performance even at low temperatures at 5 °C
- Maximum dust and dampness protection for all electrical components
- Very easy to maintain construction
- Washable pre-filters
- Portable and easily stored anywhere thanks to its rotary compressor
- Practical stacking groove for stable, space-saving storage and transport
- Stackable with equally dimensioned models
- Tried and tested German industrial design – protected prototype
- 34 litres at 26.7 degrees and 60% relative humidity
- 27.6 litres at 20 degrees and 60% relative humidity
- 12 litres at 10 degrees and 60% relative humidity
- Includes pump out with a 10m clear hose
This becomes possible because of a clever combination of a strong 1.27 kW rotary compressor and a quality fan for airflow rates of up to 1,000 m³/h.
Watch our video below on how to setup the handle on the Trotec TTK 355.
Temperature
|
Relative Humidity | ||
60% | 80% | ||
|
5°C | 8.4 litres | 14.4 litres |
10°C | 12 litres | 20.4 litres | |
15°C | 18 litres | 31.2 litres | |
20°C | 27.6 litres | 40.8 litres | |
25°C | 31.2 litres | 48 litres | |
26.7°C | 34 litres | ||
30°C | 37.2 litres | 55 litres | |
35°C | 40.8 litres | 70 litres |
Thanks to the high air circulation, the tuned heat exchange system is always able to feed extreme humidity from the ambient air for quick drying. Up to 70 litres of humidity can be removed from the room air per day with just one TTK 355 S in this manner.
At the same time, compared with other defrost systems, the high-quality hot gas automatic defrost of the TTK 355 S guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no dehumidification occurs.
Common location changes and use in rough construction site conditions are no problem for this condenser dryer: Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 355 S can easily be transported over uneven terrain or up and down stairs – the rotary compressor makes it possible to transport it anywhere. And the non-marking rubber wheels leave no marks on your floorboards or other sensitive undergrounds.
A special enclosure protects the electronic components of the dehumidifier from hazardous dust or moisture, which can interfere with the functionality and durability of the electronics.
The enclosure is in no way inferior to the impressive inner values: All components of the TTK 355 S are reliably protected and attractively combined in the tried and tested German industrial design – protected prototype.
Even in storage, the TTK 355 S makes a good impression – while taking up surprisingly little space. Due to its two practical stacking grooves on top, equally sized TTK‑S devices can be safely stacked to save space during transport and storage.
Clearly arranged control panel – protected by protective bars. (1)
The serial operating hours counter of the TTK 355 S commercial dehumidifier is optionally available as a dual counter for operating and kilowatt-hours. (2)
A special enclosure reliably protects the TTK 355 S dehumidifier electronics from dangerous inclusions. (3)
Two stacking grooves make it possible to stably stack equally sized TTK‑S commercial dehumidifiers to save space. (4)
A powerful condensate pump with a pump performance of up to 50 m distance and a maximum pump height of 4 m is also available for permanent drying with the TTK 355 S.
This can be used to permanently drain condensation from whole stories of buildings. (5)
COMMERCIAL DEHUMIDIFIERS OF THE TTK-S SERIES The new standard class – top of the class.
Robust metallic housing, strong rotary compressors, low-maintenance construction, high airflow rate and wide range of usable temperatures: Whether for use in a workshop, in construction, in storage or in a laboratory – the portable, commercial dehumidifiers of the TTK S series are the perfect drying aggregates for changing applications, even in rough conditions.
With the pioneering TTK S commercial dehumidifiers, you can now benefit from a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype.
Also protected – from dust and dampness, that is – are all electrical components of the devices. A special enclosure improves the protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure makes the commercial dehumidifier predestined for use in harsh conditions.
Due to its extremely low-maintenance construction, the new TTK S generation is easier to clean than ever before and due to its low power to weight ratio and its clever mobility features, it is easy to transport.
Nevertheless, in terms of dehumidification capacity, these dryers are no lightweights: The entire heat exchange system made of high-quality components was designed to work in harmony and guarantees the maximum drying efficiency of the devices in all temperature ranges – for example, even under 15 °C in unheated rooms.
Furthermore, compared with other defrost systems, the high-quality hot gas automatic defrost guarantees a much more efficient dehumidification performance without defrost pauses on a time interval during which no defrosting occurs!
Even in the storage, these commercial dehumidifiers make a good impression – while taking up surprisingly little space. Because they are equipped with two practical stacking grooves on their tops, equally sized TTK S devices can be safely stacked to save space during transport and storage.
Benefits in practice TTK 355 S:
- Has non-colouring solid rubber tires
- Allows for easy transport with the trolley design
- Maximum dust and moisture protection for all electrical components
- Practice optimized German industrial design
- Multi stackability - even better handling property
- Belongs to the maintenance-friendly TTK-S series of all time
- Operating hours counter
Features and Benefits of the TTK 355 S dehumidifier:
- Dehumidification performance / 24 h max: 70 litres
- Operating range temperature: 5°- 32°C
- Operating range humidity: 32 to 100 % RH
- Airflow rate: 1000 m³/h (588 CFM)
- Functioning principle: refrigerative dryer
- Automatic defrost mode: hot gas
- Input voltage: 230V (50Hz)
- Power input max: 1.27 kW
- Nominal current: 5,8 A
- Refrigerant: R-410A (650 g)
- Water tank (auto-off limit): 6 litres
- Sound level dBA: 54
- Weight: 39 kg
- Length: 450 mm
- Width: 510 mm
- Height: 720 mm
Coming soon
TECHNICAL DATA | ||
---|---|---|
General information | ||
Article number | 1.120.000.163 | |
Dehumidification performance | ||
At 20 °C / 60 % RH [l/24h] | 27.6 | |
AHAM | At 26.7 °C / 60 % RH [l/24h] | 34 |
At 30 °C / 80 % RH [l/24h] | 55 | |
Max. [l/24h] | 70 | |
Amount of air | ||
Stage Max. [m³/h] (cfm) | 1000 (588) | |
Recommended room size construction drying | ||
m³ | 450 | |
m² | 180 | |
class 2 2.4m ceiling-high | m² | 35 |
Recommended room size dry keeping | ||
m³ | 900 | |
m² | 360 | |
General | ||
Min. temperature range [°C] | 5 | |
Max. temperature range [°C] | 32 | |
Min. humidity range [% RH] | 32 | |
Max. humidity range [% RH] | 100 | |
Electrical values | ||
Mains connection | 230 V/50 Hz | |
Nominal current consumption [A] | 5.8 | |
Power input [kW] | 1.3 | |
Recommended fusing [A] | 10 | |
Compressor | ||
Rotary piston compressor | SE | |
Reciprocating piston compressor | N/A | |
Type of cooling agent | R-410 A | |
Amount of cooling agent [g] | 650 | |
GWP factor | 2,088 | |
CO2 equivalent [t] | 1.36 | |
Suction Side pressure [MPa] | 1.2 | |
Discharge Side Pressure [MPa] | 4.2 | |
Water tank | ||
Contents in [Litres] | 6 | |
Sound values | ||
Distance 1 m [dB(A)] | 54 | |
Dimensions | ||
Length (packaging excluded) [mm] | 450 | |
Width (packaging excluded) [mm] | 510 | |
Height (packaging excluded) [mm] | 720 | |
Weight | ||
(packaging excluded) [kg] | 39 |
EQUIPMENT, FEATURES AND FUNCTIONS | ||
---|---|---|
Hot gas | SE | |
Electronic | N/A | |
Automatic dehumidification | ||
Non-stop dehumidification | SE | |
Analogue hygrostat | SE | |
Hygrostat-controlled | SE | |
Electronic hygrostat | N/A | |
Program-controlled | N/A | |
Fan | ||
Axial | SE | |
Radial | N/A | |
Stages | 1 | |
Condensate tank monitoring | ||
Container available | SE | |
Shut-off when full | SE | |
Indicator container full | SE | |
Room air filter | ||
Readily accessible | SE | |
Cleanable | SE | |
Ionizer selectable | N/A | |
Operating hours counter | ||
Operating hours counter | SE | |
Power meter | OA | |
Mobility | ||
Rubber-tyred metal wheels (non-marking) | SE | |
Carry/transport handle(s) | SE | |
Swivel casters with parking brakes | SE | |
Plastic wheels | N/A | |
Non-marking full-rubber wheels | N/A | |
Adjustable bar handle | N/A | |
Condensate drain | ||
Hose connection possible | SE | |
Hose included in the scope of delivery | SE | |
Condensate pump | OA | |
Recommended hose size [mm] | 19 | |
Control panel | ||
Protective bar | SE | |
Digital display | N/A | |
Comfort button | N/A | |
Shelf life | ||
Stackable | SE | |
Housing design | ||
Steel coated | SE | |
Plastic | N/A | |
Stainless steel | N/A | |
Metal plastic composite housing | N/A | |
Aluminium | N/A |