Gann BL Uni 11 - 3 in 1 Thermo-Hygrometer, Surface Temperature, Non-Invasive Moisture Meter with Plastic Box

Gann BL UNI 11 Temperature, Humidity and Building Moisture Meter

The BL UNI 11 unit is a universal measuring device for structural moisture, humidity and temperature.
The Auto Sensor Technology used by the BL UNI 11 enables the moisture meter to automatically detect the electrode connected and to adapt the measured value readout to the respective probe type.

For non-destructive moisture measurement and moisture indication in ceilings, walls, floors and other building materials, our capacitive B 55 BL structural moisture probe can be connected. The meter features preset characteristic curves for several building materials - measured values will be displayed directly (weight-% or CM-%).

In the field of humidity, a large number of electrodes can be connected, including the TF-IR BL, which enables a quick and reliable assessment of dew point undershoots by a combination of different measuring techniques.
Also, our electrodes of the RH-T 37 family can be connected. In addition to humidity and air temperature, sorption isotherms of many materials can be displayed directly in weight -%.

A TF-stick can be connected directly to the device (e.g., for measuring the room climate) or via an extension cable. This allows the TF-Stick to be used in building materials (sorption isotherms).

In addition to air temperature, surface temperatures and material temperatures (on a Pt100 basis) can be measured.

Particularly suited to air conditioning technicans, surveyors who evaluate damage caused by water, insurance companies, and as a supplement for a wood moisture meter.

Features

• Handy moisture measuring meter for fast single and series measurements
• For capacitive measurements: scan mode (1 - 200 digits) and direct display of moisture values in weight-% or CM-% for building materials, resolution: 0.1%
• Precise measurement of surface and material temperature by Pt100 sensors in four-wire sensing
• Audible alarm in case a user-defined limit is exceeded (using B 55 BL) or intermittent alert signal in case dew point threshold regions are reached (using TF-IR BL)
• By using several TF-Sticks, different measuring points can be checked in quick succession, as long adaptation times are avoided
• Min, Max and Hold functions for measured values
• Storage of the 5 most recent measured values
• Power supply: a 9-volt battery is included
• Single Plastic Box Included