Gann

The Gann Technician 3-in-1 Moisture Detection Kit is an ideal restoration starter kit for non invasive structural moisture measurements, invasive wood moisture measurements and air...

The Gann BL Uni 11 Gann BLA Plus Restorers Moisture Detection Kit is the next step up for measuring a range of situations in restoration jobs such as non invasive measurements of structural moisture,...

The Gann CH17 Expert Kit is our most comprehensive kit in the Gann range for measuring a multitude of situations in restoration jobs such as measurements of structural moisture, wood moisture,...

Gann Compact BL B2 Non Invasive Moisture Meter The BL Compact B 2 unit is an electronic structural moisture indicator for non-destructive building material moisture measurement. The meter...

Gann BLA Plus Non Invasive and Invasive Timber Meter The possibilities offered by high-precision resistance-based measurement method and the non-destructive capacitive measuring method are...

Gann Hydromette BL Compact TF-IR 2 Hygrometer with Laser Temperature The BL Compact TF-IR 2 unit has sensors for surface temperature infrared measurements as well as for measuring air temperature,...

The BL Compact unit is an electronic moisture meter for various types of wood as well as for soft building materials. The sensor pins are driven into the material to be measured and allow the...

The BL H 40 unit is a resistance-based wood moisture meter. It is used for precisely measuring sawn timber (up to 180 mm in thickness), chipboards, and veneers before and after processing. The...

Gann BL UNI 11 Temperature, Humidity and Building Moisture Meter The BL UNI 11 unit is a universal measuring device for structural moisture, humidity and temperature.The Auto Sensor...

Gann Hydromette BL Compact TF 3 Thermo - Hygrometer The BL Compact TF 3 unit is a precise thermo hygrometer for measuring the temperature and air relative humidity in many applications (e.g...

The B 55 BL probe is an electronic structural moisture indicator for non-destructive measurements in building materials. The probe uses the capacitive radio frequency principle of...

The TF-IR BL is a combined probe that can be used to simultaneously perform climate measurements (air humidity and air temperature) and infrared surface temperature measurements.This...

The OT 100 BL has a suspended sensor tip with thermal separation and resulting optimised measured value collection, e.g. on wall surfaces. Pt100 sensor in 4-wire technology Sensor pipe:...

The ET 10 BL is rugged push-in probe for temperature measurements in solids, bulk materials, liquids. Pt100 sensor in 4-wire technology Sensor pipe: 100 mm (Length), 3 mm...

The RH-T 37 BL 320 is a probe for humidity and air temperature measurements - particularly suited for applications in bulk materials and solid materials (e.g. brickwork or screeds).Its...

The RH-T 37 BL flex 250 is a probe for humidity and air temperature measurements - particularly suited for applications in bulk materials and solid materials (e.g. brickwork or screeds).Its...

The RH-T 37 BL flex 350 is a probe for humidity and air temperature measurements - particularly suited for applications in bulk materials and solid materials (e.g. brickwork or screeds).Its...

The M 18 is a ram-in electrode for measuring wood moisture. It is based on the resistance principle of measurement and can be connected to all corresponding measuring devices. The...

Telescopic extension for building moisture measurement via the non-destructive measuring electrode B 55 BL, the probe RF-T 28 EL for the measurement of relative air humidity and...

The LG-25 BL probe is a high-precision anemometer. Even very low air flows can be measured reliably. The probe features a telescopic handle, which makes it easy to reach spots that are...

The insulation prevents the measurement from being affected by surface moisture. The front part of the tips is uninsulated, therefore, layer measurements may also be performed by pushing the tips bit...

The insulation prevents the measurement from being affected by surface moisture. The front part of the tips is uninsulated, therefore, layer measurements may also be performed by pushing the tips bit...

The brush electrode pair M 25-100 is used for the resistance-based moisture measurement in hard and soft building materials. The handling is very simple: The brush heads are screwed into...

The brush electrode pair M 25-300 is used for the resistance-based moisture measurement in hard and soft building materials. The handling is very simple: The brush heads are screwed into...

The M 20 is a drive-in electrode for measuring wood moisture and building moisture. It is based on the resistance principle of measurement and can be connected to all corresponding...

The M 6 stick-in electrode pair can be used for resistance-based structural moisture measurement in hard-set building materials (such as lime-sand brick, cement screed or concrete) or...

The M 6-Bi 300 flat electrode pair is used for resistance-based moisture measurement in screed or insulating materials. Their special shape makes it possible to measure in edge and...

The stick-in electrode pins M 20-Bi 300 are used for measurement of materials hidden beneath another panel or covering. The pair of electrodes is isolated on the stem.

The deep electrodes M 21-250 were designed to measure the moisture content in structural moisture; in particular for deep measurements of all kinds of building materials. By using the deep electrodes...

Gann CH 17 Multifunctional Measuring Meter The Gann CH 17 is a multifunctional measuring instrument for measuring wood moisture, building moisture and air humidity as well as temperature...

Non-isolated electrode pins show the most humid location in the material cross-section. Maximum penetration depth: 8 mm / 1,6 mm (diameter) For moisture meter units (BL) Compact, (BL) Compact S and...

For connecting a resistance-based electrode to a meter. Compatible with: Gann CH 17 Gann BL H 40 Gann BL H 41 Gann BL HT 70 Gann BL A Plus Gann BL E Gann H 35 Gann HT 65 Gann HB 30 Gann HT...

Extension cable for connection of a BL probe to a Hydromette unit with integrated phone jack 3,5 mm (BL E, BL UNI 11). Connectors: phone jack 3,5 mm to phone plug 3,5 mm length 2m

For connection of a TF stick to a moisture meter unit with integrated phone jack 2,5 mm (BL Compact TF 3, TF-IR 2, BL UNI 11). Compatible with: Gann CH 17 Gann BL Compact TF 3 Gann BL Compact TF-IR...

Contact paste, for testing hard building materials (flooring, concrete) in conjunction with electrodes M 6 and M 21. A box contains 440 g contact paste.

HERMALLY CONDUCTIVE PASTE For improving heat transfer on rough surfaces or in case of contact problems Recommended to be used for all contactbased temperature measurements, particularly for OT 100...

Only to be used with ram-in electrode M 18.

The 16 K-25 P TF stick is used to measure humidity and air temperature. The stick is pluggable, meaning that it can be plugged directly onto a measuring device and then behaves like a permanently...

Used to store / transport GANN moisture meter units and accessories equipped with specific inlays and paddings. For Hydromette CH17 Designed for one meter plus probes and electrodes

Gann Plastic Box II is used to store / transport two blue GANN moisture meter units equipped with specific inlays and paddings. Compatible with: Gann BL Compact Gann BL Compact S Gann BL Compact B...

Used to store / transport GANN moisture meter units and accessories equipped with specific inlays and paddings. For all Classic and BL moisture meter units Designed for up to three measuring probes...

Gann Plastic Box I is used to store / transport one blue GANN moisture meter unit equipped with specific inlays and paddings. Compatible with: Gann BL Compact Gann BL Compact S Gann BL Compact B...

For checking structural moisture measuring section of resistance moisture meters.

For checking resistance in wood moisture meters with accessories.

They are only used in connection with a ram-in electrode M 18 or a drive-in electrode M 20.

Non-isolated electrode pins show the most humid location in the material cross-section. Maximum penetration depth: 10 mm / 2,5 mm (diameter) For M 6 stick-in electrode pair and M 20 drive-in...

Non-isolated electrode pins show the most humid location in the material cross-section. Maximum penetration depth: 17 mm / 2,5 mm (diameter) For M 6 stick-in electrode pair and M 20 drive-in...

Non-isolated electrode pins show the most humid location in the material cross-section. Maximum penetration depth: 54 mm / 2,5 mm (diameter) For M 6 stick-in electrode pair and M 18 ram-in...

Non-isolated electrode pins show the most humid location in the material cross-section. Maximum penetration depth: 34 mm / 2,5 mm (diameter) For M 6 stick-in electrode pair and M 18 ram-in...