Drymatic Mat 1m x 0.5m Floor and Wall

Statement from DBK Group, UK

'The Drymatic mat material are tested to UL 964 – Flammability of Shells Test and UL 964 – Ease of Ignition Test and are certified to DIN 4102 B1 and BS7837 which is flame-retardant, so will not continue to burn on their own after the heat source is removed'

These floor and wall Mats were designed to be used with the legendary heat Boost Bar and an air mover. These mats were made for 2 purposes.

• Tough, Light Weight & Compact 
• Target Drying System great for small areas and dries along the skirting's as well 
• Mats Connect Together
• Micro jets Break Through Boundary Layer 
• Evenly Heat & Dry Targeted Area
• Ideal for Walls, Floors, Ceilings & Cavities

• To be used with the larger floor mats or to target dry small area of flooring. eg along a wall or to add to a 3x1m mat which will be a 3.5x1m mat.
• To dry walls up to 50cms up and flooring 50cms across drying the skirting and behind the frame of the wall and part of the wall and floor those jobs where the water has traced along the walls.

These mats come in 3x.5 meters, 2x.5 meters and 1x.5 meters. Adding temperatures up to 60 degrees Celsius into the mats the warm air really dry’s the area fast. These mats joinable on the sides to dry large areas of lineal walls with our small 30cm mat joiners.  These mats create higher vapour pressure on the surface of the material wanting to excape to lower pressure of the air by helping to raise the surface temperature by 10 degrees you are doubling the rate of evapouration.