Gann Building Moisture Detection Restoration Kit#4

This Kit Includes

• Gann BL UNI 11 Multifunctional Measuring Device
• Gann BL E Multifunctional Measuring Device
• Gann B 55 BL Probe Sensor
• Gann TF-IR BL Probe Sensor
• Gann M 18 Ram-In Electrode
• Gann M 18 Accessory pack
• Electrode Pins without insulation - 40mm (10 pack)
• Electrode Pins without insulation - 60mm (10 pack)
• Gann M 20 Drive-In Electrode
• Gann M 20 Accessory pack
• Gann Electrode Pins without insulation - 16mm (10 pack)
• Gann Electrode Pins without insulation - 23mm (10 pack)
• Gann M 6 Stick-in Electrode Holder Pair
• Gann M 6-Bi 300 Flat Electrode Pair
• Gann M 20-Bi 300 Stick-in Electrode Pair
• Gann M 25-100 Brush Electrode Pair
• Gann Electrode Pins with Teflon insulation - 60mm (10 pack)
• Gann M 20-OF 15 Measuring Caps
• Gann MK 8 Measuring Cable
• Gann MK 26 Connecting Cable (comes with CH17)
• Gann Contact Paste
• Gann BK 14-IV Transport Case

The Gann BL E unit is a multi-purpose measuring device for structural moisture, wood moisture and temperature.

In case of building materials (e.g. screeds, mortar, renders, concrete, brick and insulating materials) all electrodes based on the resistance measuring principle can be connected. In this way, accurate moisture profiles and depth measurements of the affected areas can be carried out.
The meter features preset characteristic curves for several building materials - measured values will be displayed directly (weight-% or CM-%).

In addition, a capacitive structural moisture probe can be connected. This enables non-destructive measurement and moisture testing in ceilings, walls, floors and other building materials.

Wood moisture is also measured using the resistance principle of measurement. Thus, precision measurements of sawn timber (up to 180 mm in thickness), chipboard and veneers are possible. All common types of wood can be measured.

In addition to surface temperatures, material temperatures can be measured (on a Pt100 basis).

Particularly suited for painting, interior fitting, parquet reclining contractors, wood-processing companies, construction companies, architectes and residential building construction companies.

Gann BL UNI 11 Temperature, Humidity and Building Moisture Meter

The BL UNI 11 unit is a universal measuring device for structural moisture, humidity and temperature.
The Auto Sensor Technology used by the BL UNI 11 enables the moisture meter to automatically detect the electrode connected and to adapt the measured value readout to the respective probe type.

For non-destructive moisture measurement and moisture indication in ceilings, walls, floors and other building materials, our capacitive B 55 BL structural moisture probe can be connected. The meter features preset characteristic curves for several building materials - measured values will be displayed directly (weight-% or CM-%).

In the field of humidity, a large number of electrodes can be connected, including the TF-IR BL, which enables a quick and reliable assessment of dew point undershoots by a combination of different measuring techniques.
Also, our electrodes of the RH-T 37 family can be connected. In addition to humidity and air temperature, sorption isotherms of many materials can be displayed directly in weight -%.

A TF-stick can be connected directly to the device (e.g., for measuring the room climate) or via an extension cable. This allows the TF-Stick to be used in building materials (sorption isotherms).

In addition to air temperature, surface temperatures and material temperatures (on a Pt100 basis) can be measured.

Particularly suited to air conditioning technicans, surveyors who evaluate damage caused by water, insurance companies, and as a supplement for a wood moisture meter.

Gann B 55 BL Sensor Probe

The B 55 BL probe is an electronic structural moisture indicator for non-destructive measurements in building materials. The probe uses the capacitive radio frequency principle of measurement.

The versatile ball sensor is used to sense moisture in building materials of any kind as well as to determine the moisture distribution in walls, ceilings, and floors.

The Auto Sensor Technology used enables the moisture meter unit to automatically detect the probe connected and to adapt the measured value readout to the respective sensor type.

The B 55 BL probe is an ideal pre-tester for all CM measurments and resistance-based meters.

Gann TF-IR BL Sensor Probe

The TF-IR BL is a combined probe that can be used to simultaneously perform climate measurements (air humidity and air temperature) and infrared surface temperature measurements. This combination of the different measuring techniques enables the TF-IR BL probe to be used for quickly and reliably assessing dew points undershoots or determining borderline conditions on surfaces such as walls, ceilings, floors as well as on window or door lintels.

The probe has an audible signal for the detection of critical surface temperatures.
When using the probe in due time mould formations (fungal growth) may be prevented and occurrence of moistening caused by condensation may be assessed reliably.

Gann M 18 Ram-in Electrode

The M 18 is a ram-in electrode for measuring wood moisture. It is based on the resistance principle of measurement and can be connected to all corresponding measuring devices.

The electrode is suitable for measuring the moisture in thick wood and in hardwood (up to 180 mm).

The user should put his palm on the top of the electrode to keep it in its position. Then it be rammed into the wood by moving the handle up and down.

Gann M 20 Drive-in Electrode

The M 20 is a drive-in electrode for measuring wood moisture and building moisture. It is based on the resistance principle of measurement and can be connected to all corresponding measuring devices.

The electrode is suitable for measuring the moisture of sawn timber (up to 50 mm in thickness), chipboard or OSB, and parquet for example. By means of a suitable impact device (e.g. a hammer), the electrode can also be driven into hard woods such as beech.

It can also be used for measurements in soft set building materials (e.g. plasters, gypsum or aerated concrete) as well as insulating materials.