The M 6-Bi 300 flat electrode pair is used for resistance-based moisture measurement in screed or insulating materials. Their special shape makes it possible to measure in edge and...
The M 20 is a drive-in electrode for measuring wood moisture and building moisture. It is based on the resistance principle of measurement and can be connected to all corresponding...
The brush electrode pair M 25-300 is used for the resistance-based moisture measurement in hard and soft building materials.
The handling is very simple: The brush heads are screwed into...
The M 6 stick-in electrode pair can be used for resistance-based structural moisture measurement in hard-set building materials (such as lime-sand brick, cement screed or concrete) or...
Can use with the Trotec Hammer Probe
The insulation prevents the measurement from being affected by surface moisture.
The front part of the tips is uninsulated, therefore, layer measurements may also...
Can use with the Trotec Hammer Probe
The insulation prevents the measurement from being affected by surface moisture.
The front part of the tips is uninsulated, therefore, layer measurements may also...
The brush electrode pair M 25-100 is used for the resistance-based moisture measurement in hard and soft building materials.
The handling is very simple: The brush heads are screwed into...
The deep electrodes M 21-250 were designed to measure the moisture content in structural moisture; in particular for deep measurements of all kinds of building materials.
By using the deep electrodes...
One pair of very thin insertion electrodes, uninsulated, with a diameter of 2 mm and a length of 300 mm.
These electrodes are great for moisture measurement in building and insulating materials...