Gann M6 plug-in Electrode Carrier pair with pins

The M 6 stick-in electrode pair can be used for resistance-based structural moisture measurement in hard-set building materials (such as lime-sand brick, cement screed or concrete) or in soft building materials (such as mortar joints, plaster or drywall boards).

In addition, the electrode heads are used as carrier system for various other electrode pairs (see below).

When measuring hard building materials, predrilling is recommended and contact mass should be used to improve the conductivity between the measured material and electrode pins.
The electrodes should always be used in pairs and optimally placed at a distance of approx. 8 to 10 cm from each other in the material to be measured.

• Including 10 electrode pins of 40 and 60 mm in length