This vacuum dual wand solution can be setup to run two wands on one vacuum. This has been created to operate with the Husqvarna DE120 OR the S26 HEPA Vacuum
Dual Wand Solution includes:
- 2x S-Wands
- 2x 7.5m hoses
- 2x Brush/Dry Floor Tool attacments
- 2x Round Brush attachments
- 1x Y-Piece connector
- Hose connectors and step down connectors
Steps to use
1. Cut black hose from DE120 while connected to the mach at approx 2 meters from the machine
2. Add 50mm hose cuff to each end thenadd hose joiner inbetween to join black hose back together.
3. Pull apart shorter DE120 Hose take off 50mm cuff and add on 50mm to 38mm cuff
4. Connect Y piece to step down cuff
5. Add both lengths of 38mm hose
6. Join wands together and connect to hose with 38mm cuffs on either end.
7. then add vacuum or brush head and vaccum away.