Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits

$5,995.00 $6,347.00
  • https://www.youtube.com/embed/GI-VRD3EZhE?list=PLN0ybNSK2wSoR-a2parZtfVaSFMfDfr2V
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II Heat Drying System, Restore Solutions, Australia
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits
  • Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits

Drymatic II MKII includes Y-Piece Kit and Exhaust Adaptor Kits

$5,995.00 $6,347.00
  • Get the DRYMATIC II with a Y PIECE and EXHAUST ADAPTOR KIT
  • Quiet, Intelligent & Energy-Efficient
  • Set your own timings for Recirculation and Exhaust Modes
  • Heat & Air Exchange to Optimise Drying Conditions
  • Operate in Neutral or Negative Pressure
  • Excels in Class 4 Drying Situations
  • Flexible System with a Range of Attachments
  • 25 kg - Roto-moulded - Stackable

The award-winning DBK Drymatic System was developed to offer the Damage Management industry a cost-effective tool that would cater to a broad range of structural drying requirements including floor drying and moisture removal.

This kit includes

Watch these videos on how the Drymatic II can be used:

  

Instructional videos

  


HOW IT WORKS


 

DRYMATIC II MKII

  • Quiet, Intelligent & Energy-Efficient
  • Heat & Air Exchange to Optimise Drying Conditions
  • Operate in Neutral or Negative Pressure
  • Excels in Class 4 Drying Situations
  • Flexible System with a Range of Attachments
  • Stackable Roto-moulded double-skinned housing/body
  • Weight is only 25 kgs
  • Portable, plug into a 10Amp Power Outlet (no gas or diesel required)
  • Touch-safe Heater Outlet
  • Quick-fix hose connection
  • Wheels for easy manoeuvrability
  • Significantly reduces the drying life cycles
  • Enhance your Experience with the 7 Port Adaptor Kit – turn your Drymatic II into a Push/Pull cavity drying system!

Which includes 3 x grey hoses, 1 x Foil hose, 4 x roto-moulded screw-in connections, 4 x Jubilee clips and a sturdy hose bag

 


FEATURES

DRYMATIC II MKII - THE RIGHT TOOL FOR THE JOB 

Recirculation Mode

The area is continuously heated up until either a temperature or humidity limit is reached.

During Recirculation Mode the Drymatic II takes air in from the Room Intake, moves it through the machine to measure Temp and RH and then reheats the air to raise the ambient temperature. It stays in this mode for whatever you set the timings for or until preset conditions are met.

Exhaust Mode

Exchanging the warm, humid air with warm, dry replenishment air. The Drymatic II can cycle between these modes to maximize the amount of water removed from the area.

In Exhaust Mode the Drymatic II takes air in from the Room Intake and purges it straight through the machine to outside via the Outside Exhaust. At the same time, the machine takes in replenishment air from an unaffected area (Outside or another room maybe) and heats that air before pushing it into the drying chamber.

The cycle is whatever you set the timings for  Recirculation (Reheating) and Exhaust (Purging) modes.  However, it’s better to Exhaust too often than not enough!

If you want to put the environment under slightly negative pressure the machine can go in the space being dried and you simply leave off the Outside Intake pipe and let the building space breathe naturally.

There are a number of ways to set the Drymatic II up to suit different situations and the recent launch of further connections expands the range of use further.


THE TWO SIDES OF THE DRYMATIC II MKII

  1. The side with the foil heater hose is the Heater Outlet (Heated Air). Next to that is the Room Intake (Air from Drying Chamber)
  2. On the other side of the machine is the Outside Exhaust (Wet Air from Room) and the Outside Intake (Replenishment Air).

There are two distinct modes of operation, Recirculation and Exhaust.


DRYMATIC II Y PIECE ADAPTOR KIT

The Y-piece splitter allows you to split your airflow into separate chambers/rooms from the Drymatic II. This Y-Piece allows you to do duct the controlled heated airflow into 2 areas.

INCLUDED Y Piece Adaptor 3 x 5m 150mm Hose 3 x Jubilee Clips 1 x 150mm to 150mm Joiner 1 x Carry Bag
 

DRYMATIC II EXHAUST ADAPTOR KIT

The Exhaust Adaptor allows the Drymatic II exhaust outlet to be reduced from 150mm to 100mm which allows you to exhaust your Drymatic II into a downlight, toilet window vent etc.

INCLUDED 1 x 150mm to 100 Reducer Adaptor 2 x Jubilee Clips 1 x 6m of 100mm Hose

 

DRYMATIC II MKII
Y PIECE KIT
EXHAUST ADAPTOR KIT