null

Drymatic II MkII Complete Adaptors Package includes exhaust adaptor, Y-piece, injection and kitchen kits

(No reviews yet) Write a Review
  • Drymatic II MKII with Complete Adaptors Kit
  • Drymatic II Heat Drying Machine
  • Drymatic II with kitchen injection drying kit
  • Drymatic II Multi Port Adaptor
  • Drymatic II Kitchen Injection Kit
  • Drymatic II Exhaust Adaptor
  • Drymatic II Y-Piece Adaptor
  • Drymatic Accessories Bag
  • Drymatic II - Stackable
  • Drymatic II - Handle
  • Drymatic II - LCD Display
  • Drymatic II - Hose Attachments
  • Drymatic II - Wheels
$7,700.00
$8,415.00

THIS KIT INCLUDES:


Frequently bought together:

Description

The award-winning DBK Drymatic System was developed to offer the Damage Management industry a cost-effective tool that would cater to a broad range of structural drying requirements including floor drying and moisture removal.

  • Quiet, Intelligent & Energy-Efficient
  • Programming the timer for exhaust and recirculation mode
  • Heat & Air Exchange to Optimise Drying Conditions
  • Operate in Neutral or Negative Pressure
  • Excels in Class 4 Drying Situations
  • Flexible System with a Range of Attachments
  • 25 kg - Roto-moulded - Stackable

 

This kit includes:


DRYMATIC II MKII

  • Quiet, Intelligent & Energy-Efficient
  • Heat & Air Exchange to Optimise Drying Conditions
  • Operate in Neutral or Negative Pressure
  • Excels in Class 4 Drying Situations
  • Flexible System with a Range of Attachments
  • Stackable Roto-moulded double-skinned housing/body
  • Weight is only 25 kgs
  • Portable, plug into a 10Amp Power Outlet (no gas or diesel required)
  • Touch-safe Heater Outlet
  • Quick-fix hose connection
  • Wheels for easy manoeuvrability
  • Significantly reduces the drying life cycles

Enhance your Experience with the 7 Port Adaptor Kit – turn your Drymatic II into a Push/Pull cavity drying system!

DRYMATIC II COMES WITH:

  • 3x grey hoses
  • 1x Foil hose
  • 4x roto-moulded screw-in connections
  • 4x Jubilee clips
  • sturdy hose bag


DRYMATIC FEATURES

DRYMATIC II MKII - THE RIGHT TOOL FOR THE JOB

Recirculation Mode

The area is continuously heated up until either a temperature or humidity limit is reached.

During Recirculation Mode the Drymatic II takes air in from the Room Intake, moves it through the machine to measure Temp and RH and then reheats the air to raise the ambient temperature. It stays in this mode for whatever you set the timings for or until preset conditions are met.

Exhaust Mode

Exchanging the warm, humid air with warm, dry replenishment air. The Drymatic II can cycle between these modes to maximize the amount of water removed from the area.

In Exhaust Mode the Drymatic II takes air in from the Room Intake and purges it straight through the machine to outside via the Outside Exhaust. At the same time, the machine takes in replenishment air from an unaffected area (Outside or another room maybe) and heats that air before pushing it into the drying chamber.

The cycle is whatever you set the timings for  Recirculation (Reheating) and Exhaust (Purging) modes.  However, it’s better to Exhaust too often than not enough!

If you want to put the environment under slightly negative pressure the machine can go in the space being dried and you simply leave off the Outside Intake pipe and let the building space breathe naturally.

There are a number of ways to set the Drymatic II up to suit different situations and the recent launch of further connections expands the range of use further.


THE TWO SIDES OF THE DRYMATIC II MKII

  1. The side with the foil heater hose is the Heater Outlet (Heated Air). Next to that is the Room Intake (Air from Drying Chamber)
  2. On the other side of the machine is the Outside Exhaust (Wet Air from Room) and the Outside Intake (Replenishment Air).

There are two distinct modes of operation, Recirculation and Exhaust.

 

DRYMATIC II Y PIECE ADAPTOR KIT

The Y-piece splitter allows you to split your airflow into separate chambers/rooms from the Drymatic II. This Y-Piece allows you to do duct the controlled heated airflow into 2 areas.

  • Y-Piece Adaptor
  • 3x 5metres of 150mm Hose
  • 3x Jubilee Clips
  • 1x 150mm to 150mm Joiner
  • 1x Carry Bag
     

DRYMATIC II EXHAUST ADAPTOR KIT

The Exhaust Adaptor allows the Drymatic II exhaust outlet to be reduced from 150mm to 100mm which allows you to exhaust your Drymatic II into a downlight, toilet window vent etc.

  • 1x 150mm to 100 Reducer Adaptor
  • 2x Jubilee Clips
  • 1x 6metres of 100mm Hose

 

DRYMATIC II INJECTION KIT WITH KITCHEN KIT

Turn your Drymatic II into a Push/Pull cavity drying system using our 7-Port adaptors and a hose kit. Create Positive, Negative or Balanced drying regimes by manipulating the number of connections fitted. Controlled heated airflow into kitchen cabinetry, cavity walls, subfloors, ceiling voids and much more.

  • 2x  Drymatic II Multi-port Adaptor 38mm
  • 1x  30metres of 38mm Hoses
  • 14x Hose Cuffs
  • 1x  Carry Bag
  • 14x 38mm to 25mm Connectors
  • 1x  2.5metres of 25mm Hose
View AllClose

Accessories

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

Spare Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

Specifications

Product Type:
Drymatic II
Product Type:
Packages
View AllClose

0 Reviews

View AllClose