- Professional water-based sealant
- Mould is not removed, but encapsulated and rendered harmless
- Can be used to seal mould fungus on hard to reach surfaces
- Great for indoor applications
Protox Encapsulator is a professional water-based sealant that can be used to seal mould fungus on surfaces where access conditions, or other conditions, making it impossible for a real mould cleaning with Protox Hysan. May be used indoor. Does not have mould preventive effect!
When applying, please note that a surface treated with Protox Encapsulator has a reduced vapour permeability. Therefore, a surface treated with Protox Encapsulator may appear as a vapour barrier – this must be considered in the choice of treatment method.
When treated with Protox Encapsulator, the mould is not removed, but encapsulated and rendered harmless. A visual inspection of the treated area could, therefore, lead to the erroneous assessment of an active mould attack. It is therefore important that the owner/user of the property receives documentation of what treatment has been done, by whom, when and with what product.
Dilution: Protox Encapsulator is ready for use and must not be further diluted.
Consumption: 4-8 m2 /litre, depending on the absorbency of the surface.
Applicating temperature: > 5° C
Application: Protox Encapsulator is applied by brush or spray. Relative humidity below 80%.The surface to be treated must be reasonably dry (wood surface below 18% wood moisture).
Stirring before application: Yes
Drying time: Touch dry: Approx. 1-2 hours
Application of topcoat: Approx. 24 hours (at 20° C / 60% RF).
Cleaning: Clean the tool with water and soap immediately after use.
Storage: Protox Encapsulator is durable for at least 2 years in unopened packaging. Store frost-free.